Can I get a PCB made in Nigeria without exporting my design overseas myself?

Yes. With a managed service like Forge, you share the requirement and the partner handles vendor fabrication and assembly; you receive the finished boards or units at a local branch.

Do I need Gerber files to start?

No. A description of the board or a linked Forge Design bill of materials is enough to scope a project; the engineering intake is handled for you.

How much does PCB fabrication cost in Nigeria?

It is quoted per project (board size, layers, quantity, assembly), in naira, from real vendor pricing, and confirmed before ordering.

How to get a PCB fabricated in Nigeria

To get a PCB fabricated in Nigeria, the practical route is to work with a local partner who manages the whole run for you: you describe the board (or share a design), and they handle vendor fabrication, contract assembly, and sourcing the components — delivered to a local branch. Forge (by Microscale) does exactly this: you start a project at forge.microscale.net/build, and a Microscale engineer scopes fabrication (via established vendors), assembly at vetted Nigerian partners, and the components behind the board, with naira pricing confirmed before anything is ordered.

Start a project on Forge Build →

Why local matters

Importing finished boards is slow and costly, and self-serve overseas fab leaves you handling customs, components, and assembly yourself. A managed local route collapses that into one relationship: fabrication, assembly, and the bill of materials handled together, with pickup at an Abuja or Lagos branch.

What you need to start

You do not need finished Gerber files to begin. A description of the board, a rough quantity, and a target timeline are enough to scope it. If you designed the circuit in Forge Design, you can link the resulting bill of materials so the components are ready to order.

What it costs

Cost depends on board size, layer count, quantity, and assembly complexity — quoted per project from real vendor pricing, in naira, and confirmed with you before anything is ordered. Small production runs are where local assembly starts to beat importing finished units.

Financing a production run

Working capital is the usual blocker. Forge makes a warm introduction to a BoI / NEXIM financing consultant and tracks it — it is a relationship, not a form to fill on the site.

Frequently asked

Can I get a PCB made in Nigeria without exporting my design overseas myself?: Yes. With a managed service like Forge, you share the requirement and the partner handles vendor fabrication and assembly; you receive the finished boards or units at a local branch.
Do I need Gerber files to start?: No. A description of the board or a linked Forge Design bill of materials is enough to scope a project; the engineering intake is handled for you.
How much does PCB fabrication cost in Nigeria?: It is quoted per project (board size, layers, quantity, assembly), in naira, from real vendor pricing, and confirmed before ordering.

Start a project on Forge Build — free to start.

/build →